Malco MRER Metal Roofing Edge Roller
- Easy to adjust thumb screws quickly lock in the stop gauges without the use of tools
- Edge Roller features an English/metric depth scale and is adjustable for 5/8-Inch thru 4-Inch (15.88mm – 101.60mm) bending depths.
- Roller at the ends of stops and a plastic pad at base of tool assure smooth non-marring operation a s the tool glides along the length of a panel and gently bends the edge wupward with repetitive motions.
- Long life roller bearings and a stainless steel body offer long, dependable tool life.
- Replacement Pads available
Product Description
The Malco Edge Roller No. Mrer Makes Clean Precise Bends Along The Edge Of Standing-Seam Metal Roofing Or Metal Building Panels. The Edge Roller Features An English/Metric Depth Scale And Is Adjustable For 5/8? – 4? (15.9Mm – 102 Mm) Bending Depths. Easy-To-Adjust Thumb Screws Quickly Lock In The Stop Gauges Without The Use Of Tools. Rollers At The Ends Of Stops And A Plastic Pad At Base Of Tool Assure Smooth Non-Marring Operation As The Tool Glides Along The Length Of A Panel And Gently Bends The Edge Upward With Repetitive Motions. Long-Life Roller Bearings And A Stainless Steel Body Offer Long, Dependable Tool Life…. More >>
Malco MRER Metal Roofing Edge Roller
We use this product to put a long bend on a roof panel that has been cut down in width. You need to exert a lot of pressure against the metal on the first pass so that the edge roller does not arc off of the bend line. Once the crease has been put in the metal, it is almost impossible to correct the bend if it is not where you want it. On the other hand, it beats using a hand seamer to bend the edges. Most of the bends that this is used on are too long to fit in a break. Not the easist product to use, but beats most of the alternatives, just takes a lot of work.