Metal Hand Tools

• Upgrade your Milling Machine, Router Table, Planer, Table Saw Fence to Digital reading
• Large, easy to read display shows inch, decimal, fractional and metric readings
• 2-in-1 Vertical and Horizontal Alloy Beam
• Measure range: 0-32″; Accuracy: 0.001″ Reading: 0.001″/0.01mm/64ths/inch
• Remote display with 50″ cord for easy installation and access

Product Description
This Digital Readout Kit can be adapted to a number of woodworking machines, including router lifts, router tables, planers and shapers. It has a remote display connected with a 50″ cord that can be disconnected for easy installation and access. The large, easy to read display reads in inches with fractions (1.64″) or millimeters. Decimal inches are displayed in .001″ increments and millimeters in .05mm increments. Fits router lifts made by Jessem, Jointech and others. The readout can be easily installed using magnets, double face tape, or screws. Vertical and horizontal slider mounting hardware is included. Packaged in protective case with 3V CR2032 battery…. More >>

iGaging DigiFENCE 35″ Magnetic Remote Saw Fence Digital Readout

• Features patented Bi-Metal technology that sets new standards of performance
• Unbreakable blade
• Stays sharp three times longer than the next best utility blade

Product Description
The Irwin BLUE BLADE is the revolutionary unbreakable utility blade. It’s bi-metal technology sets new standards of performance, by providing an unbreakable blade that stays sharp three times longer than the next best utility blade… More >>

5 Pack Irwin 2084400 Bi-Metal BLUE BLADE Utility Knife Blades 100 per Package

• 4 5″ Throat Depth
• 6″ Nominal Opening
• 1-3 16X19/32 galvanized steel bar, hardened and spring-tempered
• One piece pressure pad
• T handle with Black oxide spindle

Amazon.com Product Description
The Gross Stabil Metal Working Sliding F-Clamp provides a clamping force up to 2,800 pounds. Extremely strong, this clamp is made of a hardened and spring-tempered forged steel bar and arm, a T-handle with a black oxide spindle, and a one-piece pressure pad. It offers 4-1/2-inch throat depth and a 6-inch nominal opening. The rail size measures 1-13/16-by-19/32-inches…. More >>

Gross Stabil 2800VP-6 Metal Working Sliding F Clamp

• 10″ long
• Half round shape
• Single cut file teeth on edges
• For use on wood and soft metals
• American pattern

Product Description
10″ Half Round Bastard Wood Rasp, American Pattern, Single Cut File Teeth On Edge, For Use On Wood & Soft Metals, Used By Woodworkers, Hobbyists & Plumbers…. More >>

6 each: Nicholson Wood Rasp

• Medium Grit, 12 inch length
• 3/4 inch width
• One blade per pack
• Cuts cast iron, ceramic tile, fiberglass, slate, brick and marble
• Limited Warranty

Product Description
Milwaukee Power Tool Accessories HACKSAW BL TUNG CBD 12LG Quantity per package  1… More >>

Milwaukee 48-43-0200 12-Inch Tungsten Carbide Hacksaw Blade

• Premium Series 0/30mm Constant Prism System. All metal holder and target warranted for life.
• Fully compatible with leading manufacturers such as Sokkia, Topcon, Pentax, Nikon, etc.
• Hermetically sealed (2-1/2″) Precise Prism. Tension adjusting brass knob.
• Brass 5/8×11 bayonet adapter. Orange/white

Product Description
Premium Series 0/30mm Constant Prism System. All metal holder and target warranted for life. Fully compatible with leading manufacturers such as Sokkia, Topcon, Pentax, Nikon, etc. Hermetically sealed (2-1/2″) Precise Prism. Tension adjusting brass knob. Brass 5/8×11 bayonet adapter. Orange/white… More >>

CST/Berger 63-1010 Optima All Metal Systems Single tilt assembly with target – orange/white

• 1-1/2″ Blade Length, 9-3/4″ Tool Length
• Metalmaster Compound Action Snips
• Cuts straight, left or right in light stock
• Cuts low carbon cold rolled steel
• Self-opening action for fast, effortless feed

Product Description
Metalmaster Compound Action Snips. Cuts straight, left or right in light stock. Cuts low carbon cold rolled steel. Non-slip serrated jaws are made of wear-resistant molybdenum steel. Provides extra service demanded by the compound lever action. Self-opening action for fast, effortless feed. Convenient, protective safety latch. Yellow handles for ease of identification. Cutting Capacity: 18 Gauge Low Carbon Steel…. More >>

24 Pack Wiss M3R 9-3/4″ Metalmaster Compound Action Snips, Straight, Left, Right

• Handles have strong metal ferrules
• Made from seasoned white birch with nickel plated
• Size: 2

Product Description
* Handles have strong metal ferrules * Made from seasoned white birch with nickel plated ferrules * Size: 2… More >>

File Handle Wood

• Tubing Outside Diameter 1/4 – 7/8 in. (6 to 23 mm.)
• Spare cutting wheel located on outside of handle
• Handle houses a flip open reamer to remove burrs

Product Description
Cuts copper, brass and aluminum tubing as well as thin-walled conduit. Self-feeding ratcheting motion provides easy cutting in close quarters…. More >>

Malco RTC623 Ratcheting Tube Cutter

• Finds wood and metal studs and joists behind, walls, floors, and ceilings up to 1-1/2 inches deep for tacking up coat racks or for construction
• Normal mode for finding edges of studs and joists up to 3/4 inches (19 mm) deep
• DeepScan mode for finding studs up to 1-1/2 inches (38 mm) deep behind drywall paneling, or plywood, or a combination of both, and through most bare wood flooring
• Bright LED tells you when DeepScan is active
• For safety it indicates the presence of AC voltage while scanning

Product Description
Pinpoints the edges of wood or metal studs and joists behind walls, floors, and ceilings and continuously detects and warns of hot AC wires in all modes. Detection depth typically up to 3/4″ StudScan mode, up to 1-1/2″ DeepScan mode, AC position accuracytypically 90-250 V at 50-60 Hz within 6″ of a hot unshielded wire. AC sensing depth up to 3″ in typical drywall with Romex wiring. SpotLite pointing system shines a bright beam of light over stud edges, and has an audio signal and recessed LEDs. Non-marring wall pads keep wall clear of marks. Calibrates instantly for immediate use. Splash and water resistant, not waterproof. Operating temperature 20 degrees to 110 degrees F, weight 5.7 oz. Uses 9-V alkaline battery (Included)…. More >>

Zircon 59544 StudSensor Pro SL-AC Wood, Metal, and Live Wire Stud Sensor