Metal Hand Tools

• Optimized combination of blade design and leverage requires 25% less effort than most other compound snips
• Offset snip cuts left up to 16 gauge sheet metal
• Cuts angles, curves, circles or straight
• Drop forged, fully heat treated cutting head designed to German standards
• Soft touch plastic handles and a finely serrated cutting blades minimizes pressure in palms

Product Description
The Bessey D29ASSL-BE is a pair of Shape and Straight Left Cutting Snip.   Features: Optimized combination of blade design and leverage requires 25% less effort than most other compound snips Offset snip cuts right up to 16 gauge sheet metal Cuts angles, curves, circles or straight Drop forged, fully heat treated cutting head designed to German standards Soft touch plastic handles and a finely serrated cutting blades minimizes pressure in palms   What’s In the Box: Bessey D29ASSL-BE Shape and Straight Left Cutting Snip… More >>

Bessey D29ASSL 1-7/16-Inch Cut Capacity 10-1/4-Inch Standard Offset Left Cutting Snip

• Cutlery grade steel blades for fast, straight shearing action
• Half the weight of steel snips for comfort and portability
• Big 3-1/2″ inset blades for fast, clean cuts–even through metal seams
• Weather-resistant for longer blade life
• 3-1/2″ throat for wider spanning

Product Description
Lightweight aluminum handles with inlaid steel blades. 1/3 the weight of steel type snips. Aluminum handles have reinforcing ribs for increased strength. Steel blades are electronically heat-treated and tempered for continuous use. Precision ground cutting edges. Blades are resharpenable. No. M12: 15-1/2 oz., 12″ long No. M14: 24 oz., 14″ long… More >>

Malco M14 Andy 3-1/4-Inch Cut Capacity 14-Inch Aluminum Handled Snip

• Blade designed for cutting tight curves and heavier stock – up to 16 gauge carbon steel.
• Wear resistant molybdenum steel blades are made to stand up to the tremendous pressures created by the compound lever action.
• Non-slip grips provide superior control and comfort.

Product Description
Bulldog for notching or trimming heavy stock. 7 8″ cut; red grips…. More >>

Wiss M5R MetalMaster Bulldog 7/8-Inch Cut Capacity 9-3/4-Inch Serrated Snip

• Offset blades keep hands clear of metal and non-slip serrated jaw allows for compound lever action
• Permits cutting tight right curves and circles as well as straight, spring-action for fast, effortless feed
• Handle of high tensile strength alloy steel exceeds hand power limit
• Handy hang-up pole and green non-slip, textured grips and safety latch for superior control
• 9 1/4″ long, 1 1/4″ cut, 18 gauge capacity

Product Description
Non-slip serrated jaws made of extra tough and wear resistant special molybdenum steel. Compound action withstands the severe strain of cutting heavy stock or tight curves. Handles are formed of special high strength steel. Offset blades keep material away from hands, allowing straight or circle cuts to be made. Vinyl grips for superior control, comfort and safety. Recommended maximum capacity low carbon cold rolled 18 gauge steel. With handy hang-up hole…. More >>

Wiss M7R MetalMaster 1-1/4-Inch Cut Capacity 9-1/4-Inch Right and Straight Cut Offset Cut Snip

• Offset handles
• Cuts left and straight
• Maximum cutting life
• Maximum maneuverability

Product Description
Malco Max2000 Offset Aviation Snips The serrated upper jaw of the Max2000 Offset Snip offers solid gripping power with less burr. Ground tips on jaws allow access in tight areas, so that Max Offsets can easily make nickel size blind hole cuts. A full 1.25 inch cutting length and a cutting plane offset from handles makes trim cuts with the Max2000 Offset both accessible and efficient. Available with either a left (shown left) cutting or right cutting application. Red handle Cuts sharp left angles, straight line and 5 inch diameter circles Riveted handles Steel Handle Shaft Extends Through Full Length of Grip Ergonomic Grip Features Multi-operational latch is accessible from right, left or top Color-coded TPE (thermoplastic elastomer) upper grip Nylon lower grip Extra long life compression spring Riveted handle will not loosen… More >>

Malco M2006 MAX2000 Bulldog 1-1/4-Inch Cut Capacity 10-3/4-Inch Left Cut Offset Aviation Snip

• Cuts left and straight
• Maximum cutting life
• Maximum maneuverability

Product Description
Hardened alloy steel blades offer maximum cutting edge life. Superior material flow and lower profile allows maximum maneuverability. Fast adjusting, long life pivot bolt and nylon locking nut with pressure washer holds desired adjustment even for repetitive use in heavy gauge metal. The ergonomic grip maximizes power stroke of hand while the classic grip has the fit and feel of tradition. Tips of jaws ground to point allows access in tight quarters…. More >>

Malco M2001 MAX2000 Bulldog 1-1/3-Inch Cut Capacity 10-3/4-Inch Left Cut Aviation Snip

• Pivoting, gripping heads allow for a secure grip on uneven surfaces
• Spring-loaded operation makes clamp easier to use
• Heat-treated, investment cast jaws provide years of effective pulling power
• Wide mouth compared to MOC0450.

Product Description
Features and Benefits:Pivoting, gripping heads allow for a secure grip on uneven surfacesSpring-loaded operation makes clamp easier to useHeat-treated, investment cast jaws provide years of effective pulling powerWide mouth compared to MOC0450…. More >>

Wide Flash Clamp – 7 Ton Capacity

Product Description
Bar King Ice & Hand Sink, drop-in, single service, insulated ice chest 8″ x 14″ x 11″, drain 1″ diameter, cover stainless steel hinged removable, sink 8-1/2″ x 11-1/2″ x 5″, 3-1/2″ basket drain, faucet 4″ deck, 6″ spout, water H & C, 1/2″ IPS, 23 lb ice capacity. (Supreme Metal – D24SIBL)… More >>

Bar King Ice & Hand Sink Unit, Drop-In, Insulated Ice Chest, 23 lb Ice Capacity