Metal Hand Tools

• 14 cold chisels and punches made of high-quality drop-forged, heat-treated, high-carbon steel
• Finely finished from their mat-black hex-shafts to polished steel working ends
• Use on cold metal – flatten, indent, groove, reduce thickness, remove trash; cut rods, bars & sheets
• 5 flat cold chisels; 8 round flat-end punches (4 tapered, 4 constant dia.); 1 pointed center punch
• Tough rubberized roll-up pouch keeps them organized, evenly oiled, and dry for stowing and transport

Product Description
Can’t remember the combination to your gun safe? Crack it open with one of these Cold Chisels! But wait, there are more constructive uses for these in working most any hard or soft metal — even composites or wood in some cases. These are named Cold Chisels because they have the strength and configuration to work cold metals. 5 Flat Cold Chisels (blade width x shaft hex measurement x length): 1/2 x 3/ 8 x 6″, 5/8 x 1/2 x 7″, 3/4 x 5/8/ x 7″, 7/8 x 5/8 x 8″, 1 inch x 3/4 x 8″; 4 Tapered Punches (flat tip diameter x shaft hex measurement x length): 1/8 x 3/8 x 8 1/2″, 5/32 x 1/2 x 9″, 1/8 x 1/2 x 10″, 3/8 x 5/8 x 10″; 4 Pin Punches (flat tip diameter x shaft hex measurement x length): 3/32 x 3/8 x 5″, 1/8 x 3/8 x 5″, 3/16 x 3/8 x 6″, 1/4 x 1/2 x 6″; 1 Center Punch (tip diameter x shaft hex measurement x length): 0 x 3/8 x 5″. Flat cold chisels have a less-acute angle to the sharp portion of the blade than woodworking chisels. This gives the cutti… More >>

Cold Chisel & Punch Set – Roll-Up Pouch – 14 Pc

• 3 Popular Sizes 3/4″, 7/8″ and 1″
• Heat Treated
• Made in USA

Product Description
1 each of 3/4″, 7/8″ and 1″ Heat treated cold chisels. These chisels are forged from hardened and tempered alloy steel with a rust preventing, blasted finish.
Made in USA… More >>

Cold Chisel Set 3/4″, 7/8″ 1″ Made in USA

• Sold Individually

Product Description
Item #: KTI81959. 81959Sheet Metal Trimmer Air Chisel
Customers also search for: Tools and Storage\Pneumatics\Demolition Tools\Pneumatic Chisels and Steel Discount Sheet Metal Trimmer Air Chisel, Buy Sheet Metal Trimmer Air Chisel, Wholesale Sheet Metal Trimmer Air Chisel, 769622819598, ToolWeb, Air Hammer Chisels… More >>

Sheet Metal Trimmer Air Chisel Category: Pneumatic Chisels and Steel

• Tough Reinforced Polymer Cap for Safety
• Reduces More Than 80% of Sound & Vibration
• Larger Striking Surface Provides Hand Protection
• No metal-to-metal contact
• 100% Made In USA

Product Description
Features and Benefits: Hard Cap has reinvented the struck tool by adding an unbreakable reinforced polymer cap and oil-resistant cushion grip. The result – tools that are safer, more accurate and comfortable to use. Unbreakable, tough, reinforced polymer cap, 2-1/2 times the striking surface of a standard chisel – eliminates flying chips and mushrooming of chisel head; four cap diameters to match hammer sizes Comfortable grip reduces shock by up to 90%; oil and solvent resistant reduces hot/cold feel, enhances gripping ability. Noise level reduced by up to 80%. Hammer kickback and wrist-elbow trauma is minimized. The industrys sharpest and most accurate cutting edge Made in the U.S.A…. More >>

5/16″ x 9″ Hard Cap Pin Punch

• Tough Reinforced Polymer Cap for Safety
• Reduces More Than 80% of Sound & Vibration
• Larger striking surface provides hand protection
• No metal-to-metal contact

Product Description
Features and Benefits: Hard Cap has reinvented the struck tool by adding an unbreakable reinforced polymer cap and oil-resistant cushion grip. The result – tools that are safer, more accurate and comfortable to use. Unbreakable, tough, reinforced polymer cap, 2-1/2 times the striking surface of a standard chisel – eliminates flying chips and mushrooming of chisel head; four cap diameters to match hammer sizes Comfortable grip reduces shock by up to 90%; oil and solvent resistant reduces hot/cold feel, enhances gripping ability. Noise level reduced by up to 80%. Hammer kickback and wrist-elbow trauma is minimized. The industrys sharpest and most accurate cutting edge Made in the U.S.A…. More >>

7/32″ x 7″ Hard Cap Center Punch

Product Description
Hand painted metal seashell switch plate cover which has been hand cut from recycled 55 gallon steel drums. The design is drawn on to the flattened drum and then cut with hammer and chisel by one of our skilled metal artisans. The shell details of the switchplate are hammered so that they are rounded out to create a very unique piece. This is not flat, thin tin. This is a decorative piece that will be a distinct addition to your home.     3 holes  … More >>

Painted Metal Shell Switch Plate – 3 Holes – Hand Painted