Metal Hand Tools

• Tubing Outside Diameter 1/4 – 7/8 in. (6 to 23 mm.)
• Spare cutting wheel located on outside of handle
• Handle houses a flip open reamer to remove burrs

Product Description
Cuts copper, brass and aluminum tubing as well as thin-walled conduit. Self-feeding ratcheting motion provides easy cutting in close quarters…. More >>

Malco RTC623 Ratcheting Tube Cutter

• Head Weight 12 oz. (340 g.)
• Head Length: 4 7/8 in. (124 mm.)
• Face Size: 3/4 in. (19 mm.)
• Overall Length 11 in. (279 mm.)

Product Description
Malco Steel I-Beam Constructed Riveting HammerOne-piece forged, I-beam construction. Full-polished heads with beveled face and pein are corrosion resistant. Hammer sections are individually hardened and tempered for strength and resiliency. Leather grippedGrip is protected with a durable lacquer coating. Leather conforms to hand over time…. More >>

Malco RH4 12-Ounce Riveting Hammer -Leather Grip

• Offset handles
• Cuts left and straight
• Maximum cutting life
• Maximum maneuverability

Product Description
Malco Max2000 Offset Aviation Snips The serrated upper jaw of the Max2000 Offset Snip offers solid gripping power with less burr. Ground tips on jaws allow access in tight areas, so that Max Offsets can easily make nickel size blind hole cuts. A full 1.25 inch cutting length and a cutting plane offset from handles makes trim cuts with the Max2000 Offset both accessible and efficient. Available with either a left (shown left) cutting or right cutting application. Red handle Cuts sharp left angles, straight line and 5 inch diameter circles Riveted handles Steel Handle Shaft Extends Through Full Length of Grip Ergonomic Grip Features Multi-operational latch is accessible from right, left or top Color-coded TPE (thermoplastic elastomer) upper grip Nylon lower grip Extra long life compression spring Riveted handle will not loosen… More >>

Malco M2006 MAX2000 Bulldog 1-1/4-Inch Cut Capacity 10-3/4-Inch Left Cut Offset Aviation Snip

• Original Andy classic handle feel
• Easy Blade Replacement
• Full 3″ cutting length

Product Description
The Malco M12NG 12 inch Aluminum Andy Pattern Snip with grip is a big 12 inch snip with 3 inch cut length. The 12 inch Andy Pattern Snips will make straight cuts and mild curves through multiple layers of material. The M12NG features a comfort grip the gives you not only comfort but also control in cold, wet and hot conditions. The large handles are designed so that when you need to the tool can be easily operated while wearing gloves. The Andy Snip has pressure fit insert blades that allow quick and easy replacement. The Andy Snip is perfect for HVAC, Roofing, Siding and Gutter work along with numerous other tasks. Use the Andy Snips to cut vinyl, copper, aluminum, stainless steel, galvanized steel and mild steel…. More >>

Malco M12NG 12-Inch Straight Cut Aluminum Snip with Comfort Grip

• Aviation style steel metal snips
• Cuts sharp left angles, straight lines and tight diameter circles

Product Description
Malco’s Aviation style steel metal snips are perfect for straight cuts and slightly curved cuts in either direction. Cuts sharp right angles, straight line and 5 inches (125 millimeters) diameter circles…. More >>

Malco AV7 Right Offset Cut Aviation Snip

• Original Andy classic handle feel
• Easy Blade Replacement

Product Description
The M14A 14 inch Andy Gray Pattern Snip’s ground blade edge is suitable for mild curve cuts and ideal for fast, straight shearing or cutting multiple layers of sheet metal. Snug, rounded handle loops characterize this original Malco Andy Snip handle design. Users who find the Classic Andy Styling to be their ideal fit and feel will love the improved blade holding design that allows for easily blade replacement…. More >>

Malco M14A 14-Inch Straight Cut Aluminum Snip

• Cuts left and straight
• Maximum cutting life
• Maximum maneuverability

Product Description
Hardened alloy steel blades offer maximum cutting edge life. Superior material flow and lower profile allows maximum maneuverability. Fast adjusting, long life pivot bolt and nylon locking nut with pressure washer holds desired adjustment even for repetitive use in heavy gauge metal. The ergonomic grip maximizes power stroke of hand while the classic grip has the fit and feel of tradition. Tips of jaws ground to point allows access in tight quarters…. More >>

Malco M2001 MAX2000 Bulldog 1-1/3-Inch Cut Capacity 10-3/4-Inch Left Cut Aviation Snip

• Kit includes: Four sled style tools, FGL1, FGL24, FGL3 and FGL5 a Square plus 3 Knives FGK, FGML and FGFL and includes a tool box.
• FasGroov sled style tools are anodized aluminum with ergonomic molded handles reduce fatigue, grooved sled bottom for easy sliding
• FasGroov square is easy to use, easy to adjust anodized aluminum, five position angle arm handle accoumodates user’s reach and holds square in alignment.
• FasGroo Knives, safer to use with comfortabel molded handles, male and female shiplap knives for 1 1/2 inch ductboard can be used on closed duct sections. Feature a rounded scoring edge to cut fiberglass with out tearing skin.
• Off sets built into square and tools allow you to lay out duct board as you cut. Simply align dimensions on square with edge of previous cut and move across the board.

Product Description
The Malco FGSLK 1 Shiplap Kit Gold Hand Tools and FasGroov Square is what you need to use Malcos patented one-piece lay out system. The system incorporates the FasGroov Square with distinctive sled-style FasGroov Hand Tools. Offsets built into square and tools allow you to lay out ductboard as you cut. Simply align dimensions on square with edge of previous cut and move along the board.
This Kit also includes FasGroov Knives for the most complete ductboard system available. FasGroov Knifes feature a comfortable molded handle and can also be used on closed duct sections.
The FasGroov Square is easy to use and easy to adjust and made of anodized aluminum. The Square features a 5 position Angle Arm Handle that accommodates users reach and holds square in alignment.
The FasGroov Hand Tools are designed is a distinctive sled style and have an ergonomic handle that helps to reduce fatigue. The FasGroov Hand Tool has a Grooved Sled bottom for easy sliding and… More >>

Malco FGSLKL Fiberglass Shiplap Kit

• Finely honed double edged knife blade cleanly pierces through the outer skin, instulation and liner construction of flexible round duct and cuts in either direction.
• Thumb operated latch opens the tool’s compound leverage handles and the jaws of a built-in wire cutter to easily sever the exposed wire rib coil of the duct liner
• Tie-tensioning mechanism to install a nylon tie strap and secure the flex duct take-off collar, use the wire cutter to trim the excess
• Trimming and installing flexible round duct is now as easy as one-two-three with Malco’s FDC3 multi-purpose tool.
• Trim flex duct and tighten nylon ties with one tool.

Product Description
Malco FDC3 Fiberglass flex duct tool is avtually three tools in one, double-edged knife blade, tie-tensioning mechanism and built-in wire cutter… More >>

Malco FDC3 Multi-purpose flex duct tool

• Easy to adjust thumb screws quickly lock in the stop gauges without the use of tools
• Edge Roller features an English/metric depth scale and is adjustable for 5/8-Inch thru 4-Inch (15.88mm – 101.60mm) bending depths.
• Roller at the ends of stops and a plastic pad at base of tool assure smooth non-marring operation a s the tool glides along the length of a panel and gently bends the edge wupward with repetitive motions.
• Long life roller bearings and a stainless steel body offer long, dependable tool life.
• Replacement Pads available

Product Description
The Malco Edge Roller No. Mrer Makes Clean Precise Bends Along The Edge Of Standing-Seam Metal Roofing Or Metal Building Panels. The Edge Roller Features An English/Metric Depth Scale And Is Adjustable For 5/8? – 4? (15.9Mm – 102 Mm) Bending Depths. Easy-To-Adjust Thumb Screws Quickly Lock In The Stop Gauges Without The Use Of Tools. Rollers At The Ends Of Stops And A Plastic Pad At Base Of Tool Assure Smooth Non-Marring Operation As The Tool Glides Along The Length Of A Panel And Gently Bends The Edge Upward With Repetitive Motions. Long-Life Roller Bearings And A Stainless Steel Body Offer Long, Dependable Tool Life…. More >>

Malco MRER Metal Roofing Edge Roller