Metal Hand Tools

• 4-1/2″ x 1/16″ x 7/8″ center hole
• Type I masonry cut-off wheel
• For use with 4-1/2″ angle grinders

Product Description
Sold as 7 UNITS at $3.10 per unit. (1 unit = each.) 4-1/2″ x 1/16″ x 7/8″ center hole. Type I masonry cut-off wheel. For use with 4-1/2″ angle grinders. Use on brick, block, concrete and non-ferrous metals . Manufacturer number: 9620-002. SKU #: 2106920. Country of origin: China. Distributed by Ali Industries, Inc…. More >>

BLADE CUTOFF 4.5X1/16″MA

• 4″ x 1/16″ x 5/8″
• For use on 4″ angle grinders
• Used for cutting brick, concrete block and non- ferrous metals

Product Description
Sold as 7 UNITS at $3.10 per unit. (1 unit = each.) 4″ x 1/16″ x 5/8″. For use on 4″ angle grinders. Used for cutting brick, concrete block and non- ferrous metals. 15,300 maximum RPMS . Manufacturer number: 9606-002. SKU #: 2106904. Country of origin: China. Distributed by Ali Industries, Inc…. More >>

BLADE CUTOFF 4″X1/16″MAS

• 10″ x 1/8″ x 5/8″ center hole
• Type I masonry cut-off blade
• For use with 10″ saws

Product Description
Sold as 4 UNITS at $6.33 per unit. (1 unit = each.) 10″ x 1/8″ x 5/8″ center hole. Type I masonry cut-off blade. For use with 10″ saws. Use on brick, block, concrete and non-ferrous metals . Manufacturer number: 9660-002. SKU #: 2080307. Country of origin: China. Distributed by Ali Industries, Inc…. More >>

WHEEL CUTOFF 10″MAS ACE

• 4-1/2″ x 1/4″ x 7/8″ center hole
• Depressed masonry center grinding wheel
• For use on 4-1/2″ angle grinders

Product Description
Sold as 6 UNITS at $3.75 per unit. (1 unit = each.) 4-1/2″ x 1/4″ x 7/8″ center hole. Depressed masonry center grinding wheel. For use on 4-1/2″ angle grinders. Use on brick, concrete and non-ferrous metals . Manufacturer number: 9614-002. SKU #: 2079051. Country of origin: China. Distributed by Ali Industries, Inc…. More >>

WHEEL GRIND 4.5″ MASON A

• Arbor:
  Diameter:
  Disc Type:
  Grit: 280
  Length:
  Machine: Hand
  Material:
  Max RPM:
  Shank:
  Tooth Count:
  Use: Sanding new surfaces, burnishing old finishes, feathering fine edges, prep work, etc.
• Shipping & Shipping Charges
  Combined orders within the continental US will be charged a flat rate of $8 (Ground Shipping Only). Heleta/Bullet Industries reserves the rights to choose the final delivery method. We ship most orders the same day if they’re received before 12:00 noon CST.
• Returns & Refunds
  Bullet Industries will refund the entire purchase price for any UNUSED item within 30 days of the original purchase date. No questions asked. To return a unused item, please ship the item back to us with a copy of your receipt. We will then credit you back using the same method of the original purchase. The customer will be responsible for all shipping fees unless the mistake was on the part of Bullet Industries.

Product Description
Bullet Industries’ wet/dry sandpaper is made from sharp synthetic silicon carbide, cuts fast and smooth for wet or dry sanding between coats of varnish, paint or other finishes, sanding metal for repainting or prior primer coat, and wet finishing of plastic/fiberglass and top coats. Time and money are more important than ever, and our long lasting sandpaper allow you to get the job done sooner and more economically. Use with water or oil to reduce clogging and extend abrasive life. Available in 5×9 and 9×11 individual sheets…. More >>

Wet/Dry Sandpaper 5.5″ x 9″ -280- Used for Iron, Non-Ferrous Metals, Alloy Steel, Stainless Steel, Wood, plastic, with Hand, Palm Sanders

• Arbor:
  Diameter:
  Disc Type:
  Grit: 500
  Length:
  Machine: Hand, Palm Sanders
  Material: Silicon Carbide
  Max RPM:
  Shank:
  Tooth Count:
  Use: Iron, Non-Ferrous Metals, Alloy Steel, Stainless Steel, Wood, plastic
• WARNING!
  To prevent serious injury: Wear eye, face & body protection. Do not drop. Mount wheel & use wheel properly per ANSI B7.1 OSHA. Use guards.
• Shipping & Shipping Charges
  Combined orders within the continental US will be charged a flat rate of $8 (Ground Shipping Only).
  Heleta reserves the rights to choose the final delivery method. We ship most orders the same day if they’re received before 12:00 noon CST.
• Returns & Refunds
  Heleta will refund the entire purchase price for any UNUSED item within 30 days of the original purchase date. No questions asked. To return a unused item, please ship the item back to us with a copy of your receipt. We will then credit you back using the same method of the original purchase. The customer will be responsible for all shipping fees unless the mistake was on the part of Heleta.

Product Description
Heleta’s wet/dry sandpaper is made from sharp synthetic silicon carbide, cuts fast and smooth for wet or dry sanding between coats of varnish, paint or other finishes, sanding metal for repainting or prior primer coat, and wet finishing of plastic/fiberglass and top coats. Time and money are more important than ever, and our long lasting sandpaper allow you to get the job done sooner and more economically. Use with water or oil to reduce clogging and extend abrasive life. Available in 5×9 and 9×11 individual sheets…. More >>

Wet/Dry Sandpaper 9″ x 11″ -500- Used for Iron, Non-Ferrous Metals, Alloy Steel, Stainless Steel, Wood, plastic, with Hand, Palm Sanders

• Arbor:
  Diameter:
  Disc Type:
  Grit: 280
  Length:
  Machine: Hand, Palm Sanders
  Material: Silicon Carbide
  Max RPM:
  Shank:
  Tooth Count:
  Use: Iron, Non-Ferrous Metals, Alloy Steel, Stainless Steel, Wood, plastic
• WARNING!
  To prevent serious injury: Wear eye, face & body protection. Do not drop. Mount wheel & use wheel properly per ANSI B7.1 OSHA. Use guards.
• Shipping & Shipping Charges
  Combined orders within the continental US will be charged a flat rate of $8 (Ground Shipping Only).
  Heleta reserves the rights to choose the final delivery method. We ship most orders the same day if they’re received before 12:00 noon CST.
• Returns & Refunds
  Heleta will refund the entire purchase price for any UNUSED item within 30 days of the original purchase date. No questions asked. To return a unused item, please ship the item back to us with a copy of your receipt. We will then credit you back using the same method of the original purchase. The customer will be responsible for all shipping fees unless the mistake was on the part of Heleta.

Product Description
Heleta’s wet/dry sandpaper is made from sharp synthetic silicon carbide, cuts fast and smooth for wet or dry sanding between coats of varnish, paint or other finishes, sanding metal for repainting or prior primer coat, and wet finishing of plastic/fiberglass and top coats. Time and money are more important than ever, and our long lasting sandpaper allow you to get the job done sooner and more economically. Use with water or oil to reduce clogging and extend abrasive life. Available in 5×9 and 9×11 individual sheets…. More >>

Wet/Dry Sandpaper 9″ x 11″ -280- Used for Iron, Non-Ferrous Metals, Alloy Steel, Stainless Steel, Wood, plastic, with Hand, Palm Sanders

• Arbor:
  Diameter:
  Disc Type:
  Grit: 220
  Length:
  Machine: Hand, Palm Sanders
  Material: Silicon Carbide
  Max RPM:
  Shank:
  Tooth Count:
  Use: Iron, Non-Ferrous Metals, Alloy Steel, Stainless Steel, Wood, plastic
• WARNING!
  To prevent serious injury: Wear eye, face & body protection. Do not drop. Mount wheel & use wheel properly per ANSI B7.1 OSHA. Use guards.
• Shipping & Shipping Charges
  Combined orders within the continental US will be charged a flat rate of $8 (Ground Shipping Only).
  Heleta reserves the rights to choose the final delivery method. We ship most orders the same day if they’re received before 12:00 noon CST.
• Returns & Refunds
  Heleta will refund the entire purchase price for any UNUSED item within 30 days of the original purchase date. No questions asked. To return a unused item, please ship the item back to us with a copy of your receipt. We will then credit you back using the same method of the original purchase. The customer will be responsible for all shipping fees unless the mistake was on the part of Heleta.

Product Description
Heleta’s wet/dry sandpaper is made from sharp synthetic silicon carbide, cuts fast and smooth for wet or dry sanding between coats of varnish, paint or other finishes, sanding metal for repainting or prior primer coat, and wet finishing of plastic/fiberglass and top coats. Time and money are more important than ever, and our long lasting sandpaper allow you to get the job done sooner and more economically. Use with water or oil to reduce clogging and extend abrasive life. Available in 5×9 and 9×11 individual sheets…. More >>

Wet/Dry Sandpaper 9″ x 11″ -220- Used for Iron, Non-Ferrous Metals, Alloy Steel, Stainless Steel, Wood, plastic, with Hand, Palm Sanders

• Arbor:
  Diameter:
  Disc Type:
  Grit: 320
  Length:
  Machine: Hand, Palm Sanders
  Material: Silicon Carbide
  Max RPM:
  Shank:
  Tooth Count:
  Use: Iron, Non-Ferrous Metals, Alloy Steel, Stainless Steel, Wood, plastic
• WARNING!
  To prevent serious injury: Wear eye, face & body protection. Do not drop. Mount wheel & use wheel properly per ANSI B7.1 OSHA. Use guards.
• Shipping & Shipping Charges
  Combined orders within the continental US will be charged a flat rate of $8 (Ground Shipping Only).
  Heleta reserves the rights to choose the final delivery method. We ship most orders the same day if they’re received before 12:00 noon CST.
• Returns & Refunds
  Heleta will refund the entire purchase price for any UNUSED item within 30 days of the original purchase date. No questions asked. To return a unused item, please ship the item back to us with a copy of your receipt. We will then credit you back using the same method of the original purchase. The customer will be responsible for all shipping fees unless the mistake was on the part of Heleta.

Product Description
Heleta’s wet/dry sandpaper is made from sharp synthetic silicon carbide, cuts fast and smooth for wet or dry sanding between coats of varnish, paint or other finishes, sanding metal for repainting or prior primer coat, and wet finishing of plastic/fiberglass and top coats. Time and money are more important than ever, and our long lasting sandpaper allow you to get the job done sooner and more economically. Use with water or oil to reduce clogging and extend abrasive life. Available in 5×9 and 9×11 individual sheets…. More >>

Wet/Dry Sandpaper 9″ x 11″ -320- Used for Iron, Non-Ferrous Metals, Alloy Steel, Stainless Steel, Wood, plastic, with Hand, Palm Sanders

• Arbor:
  Diameter:
  Disc Type:
  Grit: 240
  Length:
  Machine: Hand, Palm Sanders
  Material: Silicon Carbide
  Max RPM:
  Shank:
  Tooth Count:
  Use: Iron, Non-Ferrous Metals, Alloy Steel, Stainless Steel, Wood, plastic
• WARNING!
  To prevent serious injury: Wear eye, face & body protection. Do not drop. Mount wheel & use wheel properly per ANSI B7.1 OSHA. Use guards.
• Shipping & Shipping Charges
  Combined orders within the continental US will be charged a flat rate of $8 (Ground Shipping Only).
  Heleta reserves the rights to choose the final delivery method. We ship most orders the same day if they’re received before 12:00 noon CST.
• Returns & Refunds
  Heleta will refund the entire purchase price for any UNUSED item within 30 days of the original purchase date. No questions asked. To return a unused item, please ship the item back to us with a copy of your receipt. We will then credit you back using the same method of the original purchase. The customer will be responsible for all shipping fees unless the mistake was on the part of Heleta.

Product Description
Heleta’s wet/dry sandpaper is made from sharp synthetic silicon carbide, cuts fast and smooth for wet or dry sanding between coats of varnish, paint or other finishes, sanding metal for repainting or prior primer coat, and wet finishing of plastic/fiberglass and top coats. Time and money are more important than ever, and our long lasting sandpaper allow you to get the job done sooner and more economically. Use with water or oil to reduce clogging and extend abrasive life. Available in 5×9 and 9×11 individual sheets…. More >>

Wet/Dry Sandpaper 9″ x 11″ -240- Used for Iron, Non-Ferrous Metals, Alloy Steel, Stainless Steel, Wood, plastic, with Hand, Palm Sanders