Metal Hand Tools

• Optimized combination of blade design and leverage requires 25% less effort than most other compound snips
• Offset snip cuts left up to 16 gauge sheet metal
• Cuts angles, curves, circles or straight
• Drop forged, fully heat treated cutting head designed to German standards
• Soft touch plastic handles and a finely serrated cutting blades minimizes pressure in palms

Product Description
The Bessey D29ASSL-BE is a pair of Shape and Straight Left Cutting Snip.   Features: Optimized combination of blade design and leverage requires 25% less effort than most other compound snips Offset snip cuts right up to 16 gauge sheet metal Cuts angles, curves, circles or straight Drop forged, fully heat treated cutting head designed to German standards Soft touch plastic handles and a finely serrated cutting blades minimizes pressure in palms   What’s In the Box: Bessey D29ASSL-BE Shape and Straight Left Cutting Snip… More >>

Bessey D29ASSL 1-7/16-Inch Cut Capacity 10-1/4-Inch Standard Offset Left Cutting Snip

• Cutlery grade steel blades for fast, straight shearing action
• Half the weight of steel snips for comfort and portability
• Big 3-1/2″ inset blades for fast, clean cuts–even through metal seams
• Weather-resistant for longer blade life
• 3-1/2″ throat for wider spanning

Product Description
Lightweight aluminum handles with inlaid steel blades. 1/3 the weight of steel type snips. Aluminum handles have reinforcing ribs for increased strength. Steel blades are electronically heat-treated and tempered for continuous use. Precision ground cutting edges. Blades are resharpenable. No. M12: 15-1/2 oz., 12″ long No. M14: 24 oz., 14″ long… More >>

Malco M14 Andy 3-1/4-Inch Cut Capacity 14-Inch Aluminum Handled Snip

• Aviation style steel metal snips
• Cuts straight, left, and right
• Industry standard yellow grip

Product Description
Aviation style steel metal snips for straight cuts and slightly curved cuts in either direction…. More >>

Malco AV3 Combo Cut Aviation Snip

• Blade designed for cutting tight curves and heavier stock – up to 16 gauge carbon steel.
• Wear resistant molybdenum steel blades are made to stand up to the tremendous pressures created by the compound lever action.
• Non-slip grips provide superior control and comfort.

Product Description
Bulldog for notching or trimming heavy stock. 7 8″ cut; red grips…. More >>

Wiss M5R MetalMaster Bulldog 7/8-Inch Cut Capacity 9-3/4-Inch Serrated Snip

• Offset blades keep hands clear of metal and non-slip serrated jaw allows for compound lever action
• Permits cutting tight right curves and circles as well as straight, spring-action for fast, effortless feed
• Handle of high tensile strength alloy steel exceeds hand power limit
• Handy hang-up pole and green non-slip, textured grips and safety latch for superior control
• 9 1/4″ long, 1 1/4″ cut, 18 gauge capacity

Product Description
Non-slip serrated jaws made of extra tough and wear resistant special molybdenum steel. Compound action withstands the severe strain of cutting heavy stock or tight curves. Handles are formed of special high strength steel. Offset blades keep material away from hands, allowing straight or circle cuts to be made. Vinyl grips for superior control, comfort and safety. Recommended maximum capacity low carbon cold rolled 18 gauge steel. With handy hang-up hole…. More >>

Wiss M7R MetalMaster 1-1/4-Inch Cut Capacity 9-1/4-Inch Right and Straight Cut Offset Cut Snip

• Offset handles
• Cuts left and straight
• Maximum cutting life
• Maximum maneuverability

Product Description
Malco Max2000 Offset Aviation Snips The serrated upper jaw of the Max2000 Offset Snip offers solid gripping power with less burr. Ground tips on jaws allow access in tight areas, so that Max Offsets can easily make nickel size blind hole cuts. A full 1.25 inch cutting length and a cutting plane offset from handles makes trim cuts with the Max2000 Offset both accessible and efficient. Available with either a left (shown left) cutting or right cutting application. Red handle Cuts sharp left angles, straight line and 5 inch diameter circles Riveted handles Steel Handle Shaft Extends Through Full Length of Grip Ergonomic Grip Features Multi-operational latch is accessible from right, left or top Color-coded TPE (thermoplastic elastomer) upper grip Nylon lower grip Extra long life compression spring Riveted handle will not loosen… More >>

Malco M2006 MAX2000 Bulldog 1-1/4-Inch Cut Capacity 10-3/4-Inch Left Cut Offset Aviation Snip

• Original Andy classic handle feel
• Easy Blade Replacement
• Full 3″ cutting length

Product Description
The Malco M12NG 12 inch Aluminum Andy Pattern Snip with grip is a big 12 inch snip with 3 inch cut length. The 12 inch Andy Pattern Snips will make straight cuts and mild curves through multiple layers of material. The M12NG features a comfort grip the gives you not only comfort but also control in cold, wet and hot conditions. The large handles are designed so that when you need to the tool can be easily operated while wearing gloves. The Andy Snip has pressure fit insert blades that allow quick and easy replacement. The Andy Snip is perfect for HVAC, Roofing, Siding and Gutter work along with numerous other tasks. Use the Andy Snips to cut vinyl, copper, aluminum, stainless steel, galvanized steel and mild steel…. More >>

Malco M12NG 12-Inch Straight Cut Aluminum Snip with Comfort Grip

• Aviation style steel metal snips
• Cuts sharp left angles, straight lines and tight diameter circles

Product Description
Malco’s Aviation style steel metal snips are perfect for straight cuts and slightly curved cuts in either direction. Cuts sharp right angles, straight line and 5 inches (125 millimeters) diameter circles…. More >>

Malco AV7 Right Offset Cut Aviation Snip

• Original Andy classic handle feel
• Easy Blade Replacement

Product Description
The M14A 14 inch Andy Gray Pattern Snip’s ground blade edge is suitable for mild curve cuts and ideal for fast, straight shearing or cutting multiple layers of sheet metal. Snug, rounded handle loops characterize this original Malco Andy Snip handle design. Users who find the Classic Andy Styling to be their ideal fit and feel will love the improved blade holding design that allows for easily blade replacement…. More >>

Malco M14A 14-Inch Straight Cut Aluminum Snip

Product Description
3-1/2″ (89mm) length to cut. 6 angled cutting edge for cutting circles and tight curves. Replaceable blades of high-carbon steel with hollow ground cutting edges for superior cutting performance…. More >>

Do it Best M1200 13in Magnesium Snip