Metal Hand Tools

• Blade designed for cutting tight curves and heavier stock – up to 16 gauge carbon steel.
• Wear resistant molybdenum steel blades are made to stand up to the tremendous pressures created by the compound lever action.
• Non-slip grips provide superior control and comfort.

Product Description
Bulldog for notching or trimming heavy stock. 7 8″ cut; red grips…. More >>

Wiss M5R MetalMaster Bulldog 7/8-Inch Cut Capacity 9-3/4-Inch Serrated Snip

• Offset blades keep hands clear of metal and non-slip serrated jaw allows for compound lever action
• Permits cutting tight right curves and circles as well as straight, spring-action for fast, effortless feed
• Handle of high tensile strength alloy steel exceeds hand power limit
• Handy hang-up pole and green non-slip, textured grips and safety latch for superior control
• 9 1/4″ long, 1 1/4″ cut, 18 gauge capacity

Product Description
Non-slip serrated jaws made of extra tough and wear resistant special molybdenum steel. Compound action withstands the severe strain of cutting heavy stock or tight curves. Handles are formed of special high strength steel. Offset blades keep material away from hands, allowing straight or circle cuts to be made. Vinyl grips for superior control, comfort and safety. Recommended maximum capacity low carbon cold rolled 18 gauge steel. With handy hang-up hole…. More >>

Wiss M7R MetalMaster 1-1/4-Inch Cut Capacity 9-1/4-Inch Right and Straight Cut Offset Cut Snip

• Serrated lower blade for better grip on materials being cut. Cutting notch on lower blade for rope and twine,
• Strong high quality stainless steel blades for corrosion resistance.
• Adjustable pivot changes cutting tension for best feel.
• Hard plastic handles clean easily.

Product Description
Heavy-Duty 10 In. Shop Shears Tool Type: Shop Shear Applications: Multi-purpose Overall Length: 10 Length of Cut: 5-1/2 Handle Style: Straight Handle Material: Ergonomic Comfort Handle Type: Straight… More >>

Wiss W912 10-Inch Shop Shears with Serrated Blades

• 2-1/4″ Blade Length, 9-3/4″ Tool Length
• Cuts straight and wide curves when trimming light gauge stock
• For plumbing, heating, air conditioning and roofing trades
• Blades individually hand edged for maximum cutting efficiency
• Flat face guides tool along straight line

Product Description
Cuts straight and wide curves (when trimming light gauge stock). For plumbing, heating, air conditioning and roofing trades. Blades individually hand edged for maximum cutting efficiency. Flat face guides tool along straight line. Blades of finest quality steel hot drop-forged for sharp edge, long life. Rust resistant blades. Cushion handle for comfort and better grip. Cuts low carbon cold rolled steel. Cutting Capacity: 23 Gauge Low Carbon Steel…. More >>

Wiss A11N 9-3/4″ Straight Pattern Tinner’s Snips

• 3″ Blade Length, 10-1/2″ Tool Length
• Combines long cut of tinners snips with the strength of compound action
• Compound action multiplies the force of the hand by five times
• For making long, fast cuts in material like: paper, plastic, sheet metal
• Cuts up to 20 gauge low carbon cold rolled steel

Product Description
Combines long cut of tinners snips with the strength of compound action. Compound action multiplies the force of the hand by five times. For making long, fast cuts in material like: paper, plastic, sheet metal. Cuts up to 20 gauge low carbon cold rolled steel. Features non-slip, serrated jaws as well as non-slip textured grips…. More >>

Wiss M300 10-1/2″ MultiMaster Compound Action Snips Hi-Viz Handle Grips

• 3″ Blade Length, 12-1/2″ Tool Length
• Cuts straight and wide curves when trimming light gauge stock
• For plumbing, heating, air conditioning and roofing trades
• Blades individually hand edged for maximum cutting efficiency
• Flat face guides tool along straight line

Product Description
Cuts straight and wide curves (when trimming light gauge stock). For plumbing, heating, air conditioning and roofing trades. Blades individually hand edged for maximum cutting efficiency. Flat face guides tool along straight line. Blades of finest quality steel hot drop-forged for sharp edge, long life. Rust resistant blades. Cushion handle for comfort and better grip. Cuts low carbon cold rolled steel. Cutting Capacity: 20 Gauge Low Carbon Steel…. More >>

Wiss A9N 12-1/2″ Straight Pattern Tinner’s Snips

• 1-1/2″ Blade Length, 9-3/4″ Tool Length
• Metalmaster Compound Action Snips
• Cuts straight, left or right in light stock
• Cuts low carbon cold rolled steel
• Self-opening action for fast, effortless feed

Product Description
Metalmaster Compound Action Snips. Cuts straight, left or right in light stock. Cuts low carbon cold rolled steel. Non-slip serrated jaws are made of wear-resistant molybdenum steel. Provides extra service demanded by the compound lever action. Self-opening action for fast, effortless feed. Convenient, protective safety latch. Yellow handles for ease of identification. Cutting Capacity: 18 Gauge Low Carbon Steel…. More >>

6 Pack Wiss M3R 9-3/4″ Metalmaster Compound Action Snips, Straight, Left, Right

• 3″ Blade Length, 12-1/2″ Tool Length
• Cuts straight and wide curves when trimming light gauge stock
• For plumbing, heating, air conditioning and roofing trades
• Blades individually hand edged for maximum cutting efficiency
• Flat face guides tool along straight line

Product Description
Cuts straight and wide curves (when trimming light gauge stock). For plumbing, heating, air conditioning and roofing trades. Blades individually hand edged for maximum cutting efficiency. Flat face guides tool along straight line. Blades of finest quality steel hot drop-forged for sharp edge, long life. Rust resistant blades. Cushion handle for comfort and better grip. Cuts low carbon cold rolled steel. Cutting Capacity: 20 Gauge Low Carbon Steel…. More >>

6 Pack Wiss A9N 12-1/2″ Straight Pattern Tinner’s Snips

• 1-3/8″ Blade Length, 9-3/4″ Tool Length
• Metalmaster Compound Action Snips
• Left cut, cuts left from tight curves to straight
• Cuts low carbon cold rolled steel
• Self-opening action for fast, effortless feed

Product Description
Metalmaster Compound Action Snips. Left cut, cuts left from tight curves to straight. Cuts low carbon cold rolled steel. Non-slip serrated jaws are made of wear-resistant molybdenum steel. Provides extra service demanded by the compound lever action. Self-opening action for fast, effortless feed. Convenient, protective safety latch. Red handles for ease of identification. Cutting Capacity: 18 Gauge Low Carbon Steel…. More >>

6 Pack Wiss M1R 9-3/4″ Metalmaster Compound Action Snips, Cuts Straight to Left

• 1-3/8″ Blade Length, 9-3/4″ Tool Length
• Metalmaster Compound Action Snips
• Right cut, cuts right from tight curve to straight
• Cuts low carbon cold rolled steel
• Self-opening action for fast, effortless feed

Product Description
Metalmaster Compound Action Snips. Right cut, cuts right from tight curve to straight. Cuts low carbon cold rolled steel. Non-slip serrated jaws are made of wear-resistant molybdenum steel. Provides extra service demanded by the compound lever action. Self-opening action for fast, effortless feed. Convenient, protective safety latch. Green handles for ease of identification. Cutting Capacity: 18 Gauge Low Carbon Steel…. More >>

Wiss M2R 9-3/4″ Metalmaster Compound Action Snips, Cuts Straight to Right